Self-installable Power Module

353,11 VAT excluded

The Self-Installable Power Module is attached to the cold water inlet of the heater and is responsible for pumping hot water during recirculation.

It is Self-installable, so you can easily install it yourself.

EAN: N/A Category:

Description

The Waisense Comfort Self-Installable Power Module complements the Self-Installable Basic Kit or Basic Kit with Self-Installable On-Battery Activator.

Content

  • Tacos: Yes
  • Screws: Yes
  • Number of push-in fittings: Yes, 2 (1/2″)
  • Trim Caps: No
  • Plugs: No

POWER MODULE

  • Weight 3.5kg
  • Voltage 230V
  • Frequency 50-60Hz
  • Intensity 0.65A
  • Wiring (3m – 3×1.5mm2):
    • BLUE: Neutral
    • BLACK OR BROWN: Phase
    • GREEN AND YELLOW: Ground
  • Maximum Power 100W
  • Nominal Power 90W
  • Minimum Power 46W
  • Standby Power <2W
  • Maximum Height 6mWC
  • Maximum Flowrate 40l/min
  • Maximum operating pressure 800kPa
  • Operating temperature range 0-35°C
  • Protection thermostat limit 70°C
  • Maximum temperature 110°C
  • Estimated wireless communication range 25m

Additional information

Weight 3,5 kg
Tipo

Self-installable

No recently viewed products to display